NowyStyl xenium duo back ☀️ office chair | all colors

NowyStyl Rohde & Grahl xenium duo back - Office swivel chair with headrest (GS certificate type B)

Note: Some of the images displayed do not correspond to the selected variation.

NowyStyl Rohde & Grahl xenium duo back - Office swivel chair with headrest (GS Certificate Type B) - buy cheaply

The Xenium Duo-Back is a top product from the brand Rohde & Grahl, which is part of the renowned Nowy Styl Group. This model is the ideal choice for anyone looking for an office chair with exceptional, health-promoting back support. The revolutionary Duo-Back system noticeably relieves your spine and promotes active sitting. The GS Certification Type B confirms its outstanding quality and tested safety.

The Duo-Back System: Active Relief for Your Spine

The special feature of this model is the unique and patented Duo-Back System. Instead of a single backrest, it consists of two separate, flexibly mounted backrest shells.

Dynamic Support: The two backrest shells adapt to the movements of your upper body, support the muscles, and relieve the spine. The intervertebral discs are relieved and actively supplied with nutrients when moving back and forth.
Reduction of Pressure: Due to the free mobility, pressure is taken off the spine while the muscles are specifically supported in the lumbar region. This prevents tension and ensures a long-lasting comfortable sitting experience.
Targeted Ergonomics: This system promotes healthy, dynamic sitting, allowing your back to move freely without losing support. It is the ideal solution for anyone looking to prevent or alleviate back pain.

GS Certificate Type B: Your Guarantee for Safety and Quality

The GS Certificate ("Tested Safety") is a voluntary but highly regarded safety mark in Germany. The testing is conducted by independent, authorized bodies such as TÜV or Dekra and confirms that the chair meets all legal requirements for safety and health.

Type B: This classification certifies that the Xenium swivel chair is designed and suitable for normal, daily office use. It is intended for 8-hour use per day and withstands the stresses of a typical workweek.
Continuous Testing: The GS certification is not a one-time event. The testing bodies monitor compliance with the standards through regular inspections, ensuring consistent quality throughout the entire production period.

For you as a user, the GS certificate means: Trust. You can rely on the chair being rigorously tested for stability, mechanics, materials used, and the absence of harmful substances.

Conclusion

The Xenium Duo-Back is the perfect choice for anyone looking to invest in a durable, comfortable, and above all safe office chair that focuses on active back support. With its revolutionary Duo-Back system and the assurance of the GS Certificate Type B, it offers an outstanding solution for your workplace.

Note:

This office swivel chair is delivered with a headrest. Models without a headrest are available if needed.

Delivery and Assembly:

assembled

Seat height in cm:

42 43 44 45 46 47 48 49 50 51 52 53 54

Substance group 1

➡️ Bondai

Material
- 100% polyester
Abrasion resistance according to Martindale
- 150.000 tours
Weight
- 250 g/m³
Light fastness according to EN ISO 105-B02
- min. 6
Rubbing fastness according to EN ISO 105-X12
- wet: 4-5
- dry: 4-5
Pilling according to EN ISO 12945-2
- 5
Fire protection standards
- EN 1021-1
- EN 1021-2
- BS 5852 Crib 5
- BS 7176 medium hazard
Other
- Oeko-Tex Standard 100 certificate

➡️ Era

Material
- 100% polyester, non-heavy metal dyes
Abrasion cycles according to Martindale
- ≥ 100,000 tours
Weight
- 320 g/m³
Light fastness according to EN ISO 105-B02
- min. 5
Fire protection standards
- EN 1021-1
- EN 1021-2
- BS 7176 low hazard
Other
- Oeko-Tex Standard 100 certificate
- Indoor Advantage™ certificate (Gold)

➡️ Caiman

Material
- Cover material: 100% polyurethane
- Backing material: 65% polyester, 35% cotton
Abrasion cycles according to Martindale
- 100.000 tours
Weight
- 420 g/m³
Light fastness according to EN ISO 105-B02
- min. 5
Rub fastness according to EN ISO 105-X12
- dry: 5
Fire protection standards
- EN 1021-1
- BS 5852 Source 0

➡️ Lucia

Material
- 100% recycled polyester, non-heavy metal dyes
Abrasion cycles according to Martindale
- 50.000 tours
Weight
- 260 g/m³
Light fastness according to EN ISO 105-B02
- 6
Fire protection standards
- EN 1021-1
- EN 1021-2
- BS 7176 low hazard
Other
- EU Ecolabel certificate
- Oeko-Tex Standard 100 certificate
- Indoor Advantage™ certificate (Gold)

➡️ Oflum

Material
- 100% polyester
Abrasion resistance according to Martindale:
- 162,500 cycles
Weight:
- 310 g/m³
Light fastness according to EN ISO 105-B02:
- 5
Rubbing fastness according to EN ISO 105-X12:
- wet: 4-5
- dry: 4-5
Pilling according to EN ISO 12945-2:
- 4-5
Fire protection standards:
- EN 1021-1
- EN 1021-2
Other:
- EU Ecolabel certificate
- Oeko-Tex Standard 100 certificate

➡️ Sempre

Material
- 100% polyester
Abrasion cycles according to Martindale
- 155.000 ± 5,000 tours
Weight
- 366 g/m³
Light fastness according to EN ISO 105-B02
- 3-4
Rubbing fastness according to EN ISO 105-X12
- wet: 4-5
- dry: 4-5
Pilling according to EN ISO 12945-2
- 4-5
Fire protection standards
- EN 1021-1
- EN 1021-2
Other
- EU Ecolabel certificate
- Oeko-Tex Standard 100 certificate

➡️ Sempre Melange

Material
- 100% polyester
Abrasion resistance according to Martindale
- 125.000 tours
Weight
- 375 g/m³
Light fastness according to EN ISO 105-B02
- 4-5
Rubbing fastness according to EN ISO 105-X12
- wet: 4-5
- dry: 4-5
Pilling according to EN ISO 12945-2
- 5
Fire protection standards
- EN 1021-1
- EN 1021-2
Other
- EU Ecolabel certificate
- Oeko-Tex Standard 100 certificate

Fabric group 2

➡️ Felicity

Material:
- 100% recycled post-consumer polyester
Abrasion cycles according to Martindale:
- 90,000 cycles
Weight:
- 307 g/m³
Light fastness according to EN ISO 105-B02:
- min. 5-7
Rub fastness according to EN ISO 105-X12:
- wet: 4-5
- dry: 4-5
Pilling according to EN ISO 12945-2:
- 5
Fire protection standards
- EN 1021-1
- EN 1021-2
- Calif. Bull. 117E
Other:
- EU Ecolabel certificate
- Cradle to Cradle certificate
- Oeko-Tex Standard 100 certificate

➡️ Mafra

Material
- 100% polyester
Weight
- 275 g/m³

➡️ Radio

Material
- 100% polyester FR
Abrasion cycles according to Martindale
- 80.000 tours
Weight
- 400 g/m³
Light fastness according to EN ISO 105-B02
- 6
Rub fastness according to EN ISO 105-X12
- wet: 4-5
- dry: 4-5
Fire protection standards
- EN 1021-1
- EN 1021-2
- BS 5852 Crib 5
- BS 7176 medium hazard
- DIN 4102 B1
- NF D 60-013 AM 18
- NF P 92-501-7 M1
- Önorm A 3800-1 Class B1-Q1-TR1
- Önorm B 3825
- Calif. Bull. 117E
Other
- Oeko-Tex Standard 100 certificate

➡️ Rivet

Material:
- 100% recycled post-consumer polyester
Rubbing cycles according to Martindale:
- 80 000 cycles
Weight:
- 280 g/m³
Light fastness according to EN ISO 105-B02:
- min. 6
Rubbing fastness according to EN ISO 105-X12:
- wet: min. 4
- dry: min. 4
Fire protection standards:
- EN 1021-1
- EN 1021-2
- BS 7176 low hazard
Other
- EU Ecolabel certificate
- Indoor Advantage™ certificate (Gold)

➡️ Valencia

Material
- Cover material: 100% vinyl / urethane
- Backing material: 100% Hi-Loft polyester
Abrasion cycles according to Martindale
- 300.000 tours
Weight
- 650 g/m³
Light fastness according to EN ISO 105-B02
- 5
Fire protection standards
- EN 1021-1
- EN 1021-2
- DIN 4102 B2
- NF P 92-503 M2
- Önorm A 3800-1 Q1
- Önorm B 3825
Other
- EN 71-3 Safety of toys (migration of certain elements)
- ISO 21702 Reduction of coronavirus activity by 99.9% within 24 hours of exposure to the surface
- ISO 18184 Reduction of the presence of coronavirus by more than 90% within one hour of contact
- excellent protection against bacteria, stains and fungal attack

➡️ Xtreme

Material
- 100% recycled polyester, non-heavy metal dyes
Abrasion cycles according to Martindale
- ≥ 100,000 tours
Weight
- 310 g/m³
Light fastness according to EN ISO 105-B02
- 6
Rub fastness according to EN ISO 105-X12
- wet: 4
- dry: 4
Pilling according to EN ISO 12945-2
- 5
Fire protection standards
- EN 1021-1
- EN 1021-2
- BS 5852 Crib 5
- BS 7176 medium hazard
- BS 476 Class 1
- DIN 4102 B1
- NF D 60-013
Other
- EU Ecolabel certificate
- Oeko-Tex Standard 100 certificate
- Indoor Advantage™ certificate (Gold)

Fabric group 3

➡️ Runner

Material:
- Cover material: 100% vinyl / urethane
- Backing material: 100% Hi-Loft polyester
Abrasion cycles according to Martindale:
- 300,000 cycles
Weight:
- 685 g/m³
Fire protection standards
- EN 1021-1
- EN 1021-2
- Calif. Bull. 117E
Other:
- Oeko-Tex Standard 100 certificate
- 100% free of heavy metals
- EU Ecolabel certificate

➡️ Silvertex

Material
- 80% polyester
- 20% recycled post-consumer polyester
Abrasion cycles according to Martindale
- 70.000 tours
Weight
- 318 g/m³
Light fastness according to EN ISO 105-B02
- 5-7
Rubbing fastness according to EN ISO 105-X12
- wet: 4-5
- dry: 4-5
Pilling according to EN ISO 12945-2
- 5
Fire protection standards
- EN 1021-1
- EN 1021-2
- DIN 4102 B2
- NF P 92-503 M2
- Önorm A 3800-1 Q1
- Önorm B 3825
Other
- EN 71-3 Safety of toys (migration of certain elements)
- ISO 21702 Reduction of coronavirus activity by 99.9% within 24 hours of exposure to the surface
- ISO 18184 Reduction of the presence of coronavirus by more than 90% within one hour of contact
- excellent protection against bacteria, stains and fungal attack

➡️ Step

Material
- 100% Trevira CS
Abrasion cycles according to Martindale
- 100.000 tours
Weight
- 335 g/m³
Light fastness according to EN ISO 105-B02
- min. 5-7
Rubbing fastness according to EN ISO 105-X12
- wet: 4-5
- dry: 4-5
Pilling according to EN ISO 12945-2
- min. 4-5
Fire protection standards
- EN 1021-1
- EN 1021-2
- BS 5852 Crib 5
- BS 7176 medium hazard
- DIN 4102 B1
- NF P 92-503-5 M1
- NF D 60-013 AM 18
- Calif. Bull. 117E
Other
- EU Ecolabel certificate
- Oeko-Tex Standard 100 certificate

➡️ Step Melange

Material:
- 100% Trevira CS
Abrasion cycles according to Martindale:
- 100,000 cycles
Weight
- 335 g/m³
Light fastness to EN ISO 105-B02:
- min. 5-7
Rubbing fastness to EN ISO 105-X12:
- wet: 4-5
- dry: 4-5
Pilling to EN ISO 12945-2:
- min. 4-5
Fire protection standards:
- EN 1021-1
- EN 1021-2
- BS 5852 Crib 5
- BS 7176 medium hazard
- DIN 4102 B1
- NF P 92-503-5 M1
- NF D 60-013 AM 18
- Calif. Bull. 117E
Other:
- EU Ecolabel certificate
- Oeko-Tex Standard 100 certificate

Fabric group 4

➡️ Blazer

Material
- 100% virgin wool, dyes not containing heavy metals
Abrasion cycles according to Martindale
- ≥ 50,000 tours
Weight
- 460 g/m³
Light fastness according to EN ISO 105-B02
- 5
Rub fastness according to EN ISO 105-X12
- wet: 4
- dry: 4
Fire protection standards
- EN 1021-1
- EN 1021-2
- BS 5852 Crib 5
- BS 7176 low hazard
- BS 476 Class 1
- NF D 60-013
Other
- Indoor Advantage™ certificate (Gold)

➡️ Hi-Tech

Material
- 60% polypropylene
- 29% wool
- 10% viscose
- 1% carbon fiber
Abrasion cycles according to Martindale
- ≥ 60,000 tours
Weight
- 385 g/m³
Light fastness according to EN ISO 105-B02
- 5
Fire protection standards
- EN 1021-1
- EN 1021-2
- BS 7176 low hazard
Other
- Hi-Tech is a high performance upholstery fabric with unique anti-static properties.
- It has been specially developed to dissipate the build-up of static charge from the furniture to the ground, so that there are no unpleasant knocks.

➡️ Synergy

Material
- 95% virgin wool
- 5% polyamide
Rubbing cycles according to Martindale:
- 100,000 cycles
Weight:
- 400 g/m³
Light fastness according to EN ISO 105-B02:
- 5
Rubbing fastness according to EN ISO 105-X12:
- wet: 4
- dry: 4
Pilling according to EN ISO 12945-2:
- 4
Fire protection standards:
- EN 1021-1
- EN 1021-2
- BS 7176 low hazard
- NF D 60-013
- Önorm A 3800-1 Q1
- Önorm B 3825
Other:
- EU Ecolabel certificate
- Indoor Advantage™ certificate (Gold)

➡️ Fame

Material
- 95% wool
- 5% polyamide
Abrasion resistance according to Martindale
- 200.000 tours
Weight
- 450 g/m³
Light fastness according to EN ISO 105-B02
- min. 5-7
Rubbing fastness according to EN ISO 105-X12
- wet: 4-5
- dry: 4-5
Pilling according to EN ISO 12945-2
- 4
Fire protection standards
- EN 1021-1
- EN 1021-2
- BS 5852 Crib 5
- NF D 60-013 AM 18
- Önorm B 3825-B1-3 800-Q1 UK
- Calif. Bull. 117E
Other
- EU Ecolabel certificate
- Oeko-Tex Standard 100 certificate

➡️ 24/7 Flax

Material
- 50% polyamide
- 30% wool
- 20% flax
Abrasion cycles according to Martindale
- ≥ 200,000 tours
Weight
- 390 g/m³
Light fastness according to EN ISO 105-B02
- 5
Fire protection standards
- EN 1021-1
- EN 1021-2
- BS 5852 Crib 5
- BS 7176 medium hazard
- NF D 60-013 AM 18
Other
- Indoor Advantage™ certificate (Gold)

Fabric group 5

➡️ Fine leather (SD/LE)

Material
- 100% soft upper leather (0.9 - 1.1 mm), dyed through
Fire protection standards
- EN 1021-1
- EN 1021-2

➡️ Remix

Material
- 90% virgin wool
- 10% nylon
Abrasion cycles according to Martindale
- 100.000 tours
Weight
- 300 g/m³
Light fastness according to EN ISO 105-B02
- 5-7
Rub fastness according to EN ISO 105-X12
- wet: 4-5
- dry: 4-5
Pilling according to EN ISO 12945-2
- 4
Fire protection standards
- EN 1021-1
- EN 1021-2
- BS 5852 ignition source 3
- NF D 60-013 AM 18
- Önorm A 3800-1 (Q1)
- Önorm B 3825 (B1)
- Calif. Bull. 117E
Other
- EU Ecolabel certificate
- Greenguard certificate (Gold)
- Environmental Product Declaration (EPD)

Fabric group 6

➡️ Nappa leather

Material
- 100% embossed nappa leather, 100% Western European bull hides. Leather thickness: 1.0 - 1.1 mm
Fire protection standards
- EN 1021-1
- EN 1021-2

Special fabrics

➡️ Mesh for Xenium

Material
- 75% polyester
- 25% polyamide
Abrasion resistance according to Martindale
- 40.000 tours
Weight
- 350 g/m³
Rub fastness according to EN ISO 105-X12
- wet: 4-5
- dry: 4-5
Fire protection standards
- EN 1021-1
Other
- Oeko-Tex Standard 100 certificate

Other colors on request.

Features:

Fabric groups:

The Xenium is available in 6 different fabric/price groups.

Armrests:

Without armrests
2D armrests attached to the backrest
- 2D armrests, black plastic support, black armrest (R36/B/B)
  - Made of glass fiber reinforced polyamide, with armrest made of soft polyurethane (PU)
  - Height adjustment: 90 mm
  - Pivoting pad: ± 44°
- 2D armrests, gray plastic support, gray armrest (R36/GR/GR)
  - Made of glass fiber reinforced polyamide, with soft polyurethane (PU) armrest
  - Height adjustment: 90 mm
  - Pad pivoting: ± 44°
2D armrests attached under the seat
- 2D armrests, black plastic support, black PU armrest (R46-B/B/BPU)
  - Made of glass fiber reinforced polyamide, with soft polyurethane (PU) armrest
  - Height adjustment: 100 mm
  - Width adjustment: 90 mm (total)
4D armrests
- 4D armrests, black plastic support, black armrest (R37-BL/B/B)
  - Made of glass fiber reinforced polyamide, with armrest made of soft polyurethane (PU)
  - Height adjustment: 100 mm
  - Width adjustment: 90 mm (total)
  - Pad depth adjustment: 40 mm
  - Pad pivoting: ± 360°
- 4D armrests, polished aluminum support, black armrest (R37-POL/B/B)
  - Made of glass fiber reinforced polyamide, with armrest made of soft polyurethane (PU)
  - Height adjustment: 100 mm
  - Width adjustment: 90 mm (total)
  - Pad depth adjustment: 40 mm
  - Pad pivoting: ± 360°
- 4D armrests, black aluminum support, black armrest (R38-BL/B/B)
  - Made of glass fiber reinforced polyamide, with aluminum armrest support, with soft polyurethane (PU) armrest
  - Height adjustment: 110 mm
  - Width adjustment: 80 mm (total)
  - Pad depth adjustment: 40 mm
  - Pad pivoting: ± 360°
- 4D armrests, black aluminum support, gray armrest (R38-BL/B/GR)
  - Made of glass fiber reinforced polyamide, with aluminum armrest support, with soft polyurethane (PU) armrest
  - Height adjustment: 110 mm
  - Width adjustment: 80 mm (total)
  - Pad depth adjustment: 40 mm
  - Pad pivoting: ± 360°
- 4D armrests, polished aluminum support, black armrest (R38-POL/B/B)
  - Made of glass fiber reinforced polyamide, with aluminum armrest support, with soft polyurethane (PU) armrest
  - Height adjustment: 110 mm
  - Width adjustment: 80 mm (total)
  - Pad depth adjustment: 40 mm
  - Pad pivoting: ± 360°
- 4D armrests, polished aluminum support, gray armrest (R38-POL/B/GR)
  - Made of glass fiber reinforced polyamide, with aluminum armrest support, with soft polyurethane (PU) armrest
  - Height adjustment: 110 mm
  - Width adjustment: 80 mm (total)
  - Pad depth adjustment: 40 mm
  - Pad pivoting: ± 360°

Lumbar support:

without lumbar support
with pneumatic lumbar support, adjustment with buttons - depth adjustment up to 30mm (LND2)

Frame:

Here you have the option of choosing between two frame colors:

gray
black

Seat:

without Side panels covered in the same fabric
- There is no side panel
With side panels covered in the same fabric
- There is a side panel covered in the same fabric as the seat
With side panels covered in the "Runner" fabric
- The side panel is a contrasting color and covered in the "Runner" fabric covered
- (not possible with leather and imitation leather)

Seat cushion:

For the seat cushion, you can choose from two different seats:

Molded foam
Viscoelastic foam
- The special thing about these foams is that they combine the properties of liquids and solids. "Viscous" means thick, tough—it is deformable. In combination with the elasticity, the material always returns to its original shape.

Lower backrest:

You can choose between:

Aluminum Jet Black
Polished aluminum

Mechanism:

You can choose between 4 mechanisms:

Synchronous mechanism (seat depth adjustment) (ESP-ST)
- Synchronous movement from backrest to seat in relation to 2.7:1
- Backrest opening angle (23°) synchronized with seat tilt angle (11°)
- Backrest lock in 5 positions
- Continuous weight adjustment via rotary knob
- Seat depth adjustment 100 mm
- Anti-shock Automatic safety device to prevent accidental release of the backrest
- Continuous seat height adjustment via pneumatic gas spring
Synchronous mechanism (seat depth adjustment, negative seat tilt adjustment) (ESPF-ST)
- Same as synchronous mechanism (seat depth adjustment)
- Negative seat tilt adjustment in the range from 0 - 4°
Synchronous mechanism (automatic weight adjustment, seat depth adjustment, negative seat tilt adjustment) (IND-ST)
- Synchronous movement from backrest to seat in a ratio of 3.0:1
- Backrest opening angle (20°) synchronized with seat tilt angle (6°)
- Backrest locking in 4 positions
- Automatic weight adjustment, fine adjustment
- Seat depth adjustment 100 mm
- Negative seat tilt adjustment in the range of 0-5°
- Anti-shock – Automatic safety mechanism to prevent accidental release of the backrest
- Continuous seat height adjustment via pneumatic gas spring
Comfort synchronous mechanism (seat depth adjustment, negative seat tilt adjustment) (DNP-ST)
- Synchronous movement from backrest to seat with a ratio of 2.6:1
- Backrest opening angle (26°) synchronized with seat tilt angle (10°)
- Backrest locking in 10 positions
- Continuous weight adjustment via rotary knob
- Seat depth adjustment 100 mm
- Negative seat tilt adjustment in the range of 0 - 4°
- Anti-shock - automatic safety mechanism to prevent the backrest from accidentally being triggered
- Continuous seat height adjustment via pneumatic gas spring

Gas spring:

Standard (GL-STD)
- Max. Load capacity 110 kg
Comfort depth spring (GL-CLS)
Low seat height (GL-L)
- Seat height adjustment from 390-470 mm
Higher seat height (GL-R)
- Seat height adjustment from 430-570 mm

Star base:

The star base has 5 arms and a Ø 50 mm. of 760 mm.

Plastic base in black
Aluminum base in Jet Black (RAL 9005)
Polished aluminum base

Castles:

65 mm black plastic casters with load-dependent brakes.

You can choose between two different casters:

Carpet casters (soft floor casters)
- The opposite of hard floor casters are so-called soft floor casters. As the name suggests, they are suitable for particularly soft floors, such as carpet or PVC. Thanks to their unimpeded rolling action, they glide particularly smoothly, even when the chair casters sink into the floor. However, on hard floors like laminate, they leave marks and are clearly audible. They also roll too quickly, so every movement causes the chair to immediately move slightly.
Hard Floor Casters
- Hard floor casters are always used when the floor has a firm surface. Most homes today have high-quality laminate flooring, and this is precisely what requires hard floor casters. These are whisper-quiet on the hard surface and therefore gentle, so as not to damage the laminate. In addition, hard floor casters have seat-load brakes, so they roll more slowly, which is also important on hard surfaces, as otherwise the chair would constantly slip away.

Note according to Section 5b Paragraph 3 of the German Act Against Unfair Competition: The reviews are not checked for authenticity before they are published.
They can therefore also come from consumers who have not actually purchased/used the products being reviewed.

Average item rating

All reviews:

Most helpful item review

1 from 1 person found this helpful.

Top Qualität!
Bin mit der Qualität des Streibtischstuhls sehr zufrieden!

Anonym , 05.08.2022

How do reviews work?

Total entries: 6

GS-zertifiziert und super bequem.
Das GS-Zertifikat gibt mir Sicherheit. Die Duo-Back-Lehne ist fantastisch und die Kopfstütze ist sehr angenehm. Ein Top-Stuhl für die Gesundheit.

Elke Poregede , 15.10.2024

Xenium Duo-Back: Ergonomie-Siegel.
Der Duo-Back mit GS-Zertifikat ist ein Qualitätsversprechen. Die Kopfstütze ist sehr bequem. Top-Stuhl.

Ester Buladameiner , 29.08.2024

Perfekter Stuhl mit Zertifikat
Der Duo-Rücken ist hervorragend und die GS-Zertifizierung gibt mir Sicherheit. Die Kopfstütze ist sehr bequem. Ein Top-Produkt.

Felix Butilode , 18.06.2024

Duo-Back, zertifizierte Ergonomie
Die Duo-Back-Lehne mit Kopfstütze ist ergonomisch top und das GS-Zertifikat gibt Sicherheit. Der Stuhl ist sehr bequem. Die Mechanik ist präzise.

Aleksej Hörevare , 24.05.2024

Zertifizierte Duo-Qualität, top Stuhl.
Die GS-Zertifizierung gibt zusätzliche Sicherheit, und die Duo-Back-Lehne ist unschlagbar. Die Kopfstütze ist sehr komfortabel. Ein ausgezeichneter ergonomischer Stuhl.

Sönke Delevade , 03.06.2023

1 from 1 person found this helpful.

eine unglaubliche Individualisierbarkeit
Die Individualisierbarkeit ist unglaublich, man kann so ziemlich alles seinen bedürnissen anpassen. Aber nicht nur das Aussehen und die Feauturs des Stuhl sind individualisierbar sondern auch die gesamte Funktionsweise passt sich mir an. ich liebe es

Anonym , 29.07.2022

Total entries: 6

Contact data

Title - optional

First name - optional

Last name - optional

E-Mail

Phone - Optional, but recommended for faster processing.

Question about item

Your question

Information on product safety

Manufacturer information:

Nowy Styl GmbH
Jubatus-Allee 1
92263 Ebermannsdorf
Deutschland

Internet: https://www.NowyStyl.com
E-Mail: [email protected]

Manufacturer according to GPSR
Nowy Styl GmbH, Jubatus-Allee 1, 92263 Ebermannsdorf, Baden-Württemberg, Deutschland, [email protected], https://www.NowyStyl.com

NowyStyl Rohde & Grahl xenium duo back - Office swivel chair with headrest (GS certificate type B)